•
XE102 Wall-Plugged Ethernet Bridge
•
6-ft. (1.83m) Ethernet Cable
•
Resource CD
•
XE102 User’s Guide
•
Warranty card
•
Support information card
Preparing to Install the XE102
The NETGEAR Wall-Plugged Ethernet Bridge enables you to set up a home network
using your existing electrical outlets, and easily compliments your existing network.
Computers in different rooms can share the Internet connection, files and printers using
the electrical wiring that is already in your house. There is no need for unsightly
Ethernet cabling or any additional rewiring, and it is entirely safe.
Place an Ethernet Bridge in each room that you want to set up using an Ethernet Bridge. The
XE102 Wall-Plugged Ethernet Bridge can easily connect to any device with a 10BaseT Ethernet
capable device.
In order to share an Ethernet Bridge peer-to-peer connection between computers all you will need is:
•
One (1) Ethernet Bridge device attached to each computer
Important Safety Instructions for the XE102 Wall-Plugged
Ethernet Bridge
The following precautions should be taken when using this product.
•
Read all instructions before installing and operating this product.
•
Common sense goes a long way – always be cautious when working around AC voltages.
•
Do not open and/or alter this product in any way.
•
Follow common household wiring safety practices.
If you have any questions or concerns regarding these safety measures – please contact Netgear
Customer Support.
Installation Overview
Estimated setup time is 5 to 15 minutes for each PC.
1.
Unpack the box and verify the contents.
2. Connect the Ethernet port to any Ethernet device such as a PC or Cable/DSL router.
3. Set the encryption password (highly suggested).
Package Contents
When you open the box, verify that you have the following contents.
The package includes:
1
1
2
Wall-Plugged Ethernet Bridge
XE102
Wall-Plugged Ethernet Bridge XE102
Resource CD, User's guide,
Support information card &
Warranty card
Kids' Room
XE102
Desktop
PC
Wall-Plugged Etehrnet Bridge XE102
3
