Chapter 5: Maintenance
|
51
Wireless-N 150 Router WNR612v2 User Manual
Viewing Statistics
On the Router Status screen, click the
Show Statistics
button to display wireless router
usage statistics, as shown in the following screen.
The Show Statistics screen displays the following statistics:
LAN Port
MAC Address
This field displays the Ethernet MAC address being used by the local (LAN)
port of the wireless router.
IP Address
This field displays the IP address being used by the local (LAN) port of the
wireless router. The default is 192.168.0.1.
DHCP
If Off, the wireless router does not assign IP addresses to PCs on the LAN.
If On, the wireless router does assign IP addresses to PCs on the LAN.
IP Subnet Mask This field displays the IP subnet mask used by the local (LAN) port of the
wireless router. The default is 255.255.255.0.
Wireless Port
Name (SSID)
The service set ID, also known as the wireless network name for WLAN1.
Region
The country where the unit is set up for use.
Channel
The current channel, which determines the operating frequency.
Wireless AP
Indicates if the access point feature is enabled for WLAN1. If disabled, the
Wireless LED on the front panel is off.
Broadcast
Name
Indicates if the wireless router is configured to broadcast its SSID for
WLAN1.
Wi-Fi Protected
Setup
Indicates whether the router’s PIN is enabled and whether the router is
configured for WPS (Wi-Fi Protected Setup). For more information, see
Using Push 'N' Connect (WPS) to Configure Your Wireless Network
on
page
20.
Table 4. Router Statistics Fields
Field
Description
WAN, LAN, or WLAN
The statistics for the WAN (Internet), LAN (local), and wireless LAN (WLAN)
ports. For each port, the screen displays the following:
Status
The link status of the port.
Table 3. Router Status Screen Fields (Continued)
Field
Description
