Manually Installing Your Router
14
7.
Connect any additional wired PCs to your router by inserting an Ethernet cable from a PC into
one of the three remaining LAN ports.
8.
Review that your network is now set up (as shown in
Figure 9
); you are ready to start your
network.
9.
Start your network in the correct sequence, as described below.
To start your network:
1.
Plug in and turn on the cable or DSL modem. Wait 2 minutes.
2.
Plug the end of the power adapter’s cord into the wall or a power strip, and into the power
adapter outlet of your wireless router (
F
), as shown in
Figure 10
. Wait 1 minute.
Figure 9
Failure to start or restart your network in the correct sequence could prevent you
from accessing the Internet.
Figure 10
F
Summary of Contents for WNR1000v2 - Wireless- N Router
Page 43: ...Related Documents 39...