manualshive.com logo in svg

NETGEAR WNDR3700v5, User Manual

Share
Download
NETGEAR WNDR3700v5 User Manual Download Page 67

Share a Storage Device Attached to the Router 

67

 N600 WiFi Dual Band Gigabit Router

When you connect the USB device to the router USB port, it might take up to two minutes 
before it is ready for sharing. By default, the USB device is available to all computers on 
your local area network (LAN).

3. 

On your Mac computer, select 

Go > Connect to Server

. 

4. 

Type 

afp://routerlogin.net

.

5. 

When prompted to enter your name and password, select the 

Guest

 radio button.

6. 

Click the 

Connect

 button.

A list of connected devices displays. This list includes the name admin when you log in as 

admin.

7. 

From the 

Apple

 menu, select 

System Preferences

.

8. 

Open Time Machine.

9. 

Click the 

Select Backup Disk

 button and select your USB device from the list. 

10. 

Click the 

Use for Backup

 button.

Note:

If you do not see the USB partition that you want in the Time Machine 
disk list, go to Mac finder and click that USB partition. It displays in the 
Time Machine list.

11. 

When prompted to enter your name and password, select the 

Guest

 radio button and click 

the 

Connect 

button.

When the setup is complete, the Mac automatically schedules a full backup. You can back up 
immediately if you want.

Control Access to a Storage Device

You can specify the device name, workgroups, and network folders for a storage device 
connected to the router USB port. 

To specify the storage device access settings:

1. 

Launch a web browser from a computer or wireless device that is connected to the 

network.

2. 

Type 

http://www.routerlogin.net 

or 

http://www.routerlogin.com

.

A login screen displays.

3. 

Enter the router user name and password.

The user name is 

admin

. The default password is 

password

. The user name and 

password are case-sensitive.

The BASIC Home screen displays.

Summary of Contents for WNDR3700v5


































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands