manualshive.com logo in svg

NETGEAR WNDR3700v5, User Manual

Share
Download
NETGEAR WNDR3700v5 User Manual Download Page 134

Use VPN to Access Your Network 

134

N600 WiFi Dual Band Gigabit Router 

The screen displays the progress of the installation and then displays the final installation 
screen.

10. 

Click the 

Finish

 button.

11. 

Unzip the configuration files that you downloaded and copy them to the folder where the 

VPN client is installed on your device. 

For a client device with Windows 64-bit system, the VPN client is installed at 

C:\Program files\OpenVPN\config\

 by default.

12. 

For a client device with Windows, modify the VPN interface name to 

NETGEAR-VPN

: 

a.

In Windows, select 

Start > Control Panel > Network and Internet > Network 

Connections

.

b. 

In the local area connection menu, find the local area connection with the device 

name 

TAP-Windows Adapter

.

c. 

Select the local area connection and change its name (not its device name) to 

NETGEAR-VPN

.

If you do not change the VPN interface name, the VPN tunnel connection will fail.

Use a VPN Tunnel

After you set up the router to use VPN and install the OpenVPN application on your 

computer, you can open a VPN tunnel from your computer to your router over the Internet.

For the VPN tunnel to work, the local LAN IP address of the remote WNDR3700v5 router 
must use a different LAN IP scheme from that of the local LAN where your VPN client 
computer is connected. If both networks use the same LAN IP scheme, when the VPN tunnel 
is established, you cannot access your home router or your home network with the OpenVPN 
software.

The default LAN IP address scheme for the WNDR3700v5 router is 192.x.x.x. The most 
common IP schemes are 192.x.x.x, 172.x.x.x, and 10.x.x.x. If you experience a conflict, 
change the IP scheme either for your home network or for the network with the client VPN 

Summary of Contents for WNDR3700v5


































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands