manualshive.com logo in svg

NETGEAR WNDR3700v5, User Manual

Share
Download
NETGEAR WNDR3700v5 User Manual Download Page 44

Optimize Performance 

44

N600 WiFi Dual Band Gigabit Router 

Your settings are saved.

Edit a QoS Rule

To edit a QoS rule:

1. 

Launch a web browser from a computer or wireless device that is connected to the 

network.

2. 

In the address field of the web browser, enter 

http://www.routerlogin.net 

or 

http://www.routerlogin.com

.

A login screen displays.

3. 

Enter the router user name and password.

The user name is 

admin

. The default password is 

password

. The user name and 

password are case-sensitive.

The BASIC Home screen displays.

4. 

Select 

ADVANCED > Setup > QoS Setup

.

The QoS Setup screen displays.

5. 

Select the 

QoS by Service

 radio button.

6. 

In the QoS rules table, click the application or service to select it.

7. 

Click the 

Edit

 button.

8. 

In the 

Priority

 menu, select a priority level.

9. 

Click the 

Apply

 button.

The rule’s priority is updated in the QoS rules table on the QoS Setup screen.

Delete a QoS Rule

To delete a QoS rule:

1. 

Launch a web browser from a computer or wireless device that is connected to the 

network.

2. 

In the address field of the web browser, enter 

http://www.routerlogin.net 

or 

http://www.routerlogin.com

.

A login screen displays.

3. 

Enter the router user name and password.

Summary of Contents for WNDR3700v5


































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands