NETGEAR WNA1000 - Wireless-N 150 USB Adapter, User Manual

Page: 39 / 58

NETGEAR Wireless-N 150 USB Adapter WNA1000 User Manual
2-15
v1.0, August 2009
Setting Up WPA-PSK [TKIP] or WPA2-PSK [AES] Security
To configure WPA-PSK security:
1.
Run the WNA1000 Smart Wizard.
a.
Make sure that the WNA1000 software is installed and the wireless-N USB adapter is
fully inserted in a USB port in your computer.
b.
Use the icon to open the Smart Wizard. The Settings tab displays.
2.
Configure the Security settings.
a.
In the
Profile
field, select the profile, or type in a profile name.
b.
In the
Network Name (SSID)
field, and then select the network, or enter the SSID.
c.
In the Security section, select
WPA-PSK [TKIP]
or
WPA2-PSK [AES]
, and enter the
passphrase.
For more about WPA2-PSK, see the link to “Wireless Communications:” in Appendix B .
3.
Save your settings in a profile.
a.
Click the
Save Profile
button. All the configuration settings are saved in this profile.
b.
Click
Apply
, and then click
Close
to exit the Smart Wizard.
Note:
You will not get a wireless network connection unless the network SSID
matches exactly what is configured in the access point.
Figure 2-12