Monitor and Maintain the Extender
35
N300 WiFi Range Extender
4.
Select
Maintenance > Firmware Upgrade
.
5.
Click the
Check
button.
6.
If new firmware is available, follow the onscreen prompts to download it onto your computer.
Note:
You might need to unzip the firmware file.
7.
Click the
Browse
button.
8.
Locate and select the new firmware file.
CAUTION:
After you click the
Upload
button, do not try to go online, turn off the
extender, shut down the computer, or do anything else to the extender
until it finishes restarting!
9.
Click the
Upload
button.
The firmware update starts and the extender restarts. This process takes a couple of
minutes
View Wired and Wireless Network Devices
You can view the active wired and wireless devices in both the extender network and the
network to which the extender is connected. If you do not recognize a wireless device, it
might be an intruder.
To view devices on the network:
1.
On your computer, launch a web browser.
2.
In the address field of your browser, enter
http://www.mywifiext.net
.
You are prompted to enter a user name and password. If you do not see the login prompt,
make sure to include
http://
when you type http://www.mywifiext.net in your browser.
3.
Type
admin
for the user name and
password
for the password.
If you already changed the password, type your personalized password.
Downloaded from www.vandenborre.be
