Get Started
16
N300
WiF
Range
Extender
11.
When prompted, set the network name (SSID), security option, and password, and click the
NEXT
button.
Your settings are applied and the extender is ready to be used as an access point.
12.
Use a WiFi network manager on the computer or WiFi device to connect to the new access
point network.
Repeat this step for all of your computers and WiFi devices.
13.
Click the
CONTINUE
button.
A page displays that says you successfully created an access point.
14.
Click the
NEXT
button.
The registration page displays.
15.
Complete the registration fields and click the
FINISH
button to complete the setup.
If you do not want to register your extender, click the
Skip Registration
link. Note that
you must register your extender before you can use NETGEAR telephone support.
The Status page displays.
Log In to the Extender After Installation
After installation, you can log in to the extender to view or change the extender’s settings.
To log in to the extender:
1.
Use a WiFi network manager on a computer or WiFi device to find and connect to the
new extended WiFi network.
After the connection with the computer or WiFi device is established, the Device Link LED
lights solid green.
2.
Launch a web browser.
3.
Enter
www.mywifiext.net
in the address field of the browser.
A login window opens.
4.
Enter your email address and password and click the
LOG IN
button.
The Status page displays.
Run Smart Setup Installation
You can use Smart Setup to change the extender settings. This is an easy way to connect
the extender to a different router or to change the extender WiFi network name (SSID) or
WiFi password.
