Get Started
11
N300
WiF
Range
Extender
2.
Within two minutes, press the
WPS
button on your router or access point.
The WPS LED on the extender lights solid green, the Router Link LED lights, and the
extender connects to your existing WiFi network.
If the Router Link LED does not light, try again. If it still does not light, see
3.
Find the new extender network name on your computer or WiFi device.
The extender creates two new extended WiFi networks. The extender’s new WiFi
network names are based on your existing WiFi network name, with _EXT at the end of
the name.
For example:
•
Existing WiFi network name
. MyNetworkName
•
New extended network name
. MyNetworkName_EXT
4.
Connect your computer or WiFi devices to the new extended WiFi network.
Use the same WiFi password that you use for your WiFi router.
5.
Unplug the extender and move it to a new location closer to the area with a poor WiFi signal.
The location that you choose must be within the range of your existing WiFi router
network.
6.
Plug the extender into an electrical outlet.
7.
Wait for the Status LED to light amber and then turn green.
If the Status LED does not light, press the
Power On/Off
button on the side of the
extender.
8.
Use the Router Link LED on the front panel to help you choose a spot where the
extender-to-router connection is optimal.
Connect with Web Browser Setup
You can use a web browser to log in to the extender and set up its WiFi connection to your
existing WiFi router.
To use a web browser to connect the extender to your WiFi router:
1.
Use a WiFi network manager on a computer or WiFi device to find and connect to the
extender WiFi network NETGEAR_EXT.
After the connection with the computer or WiFi device is established, the Device Link LED
lights.
2.
Launch web browser.
3.
Enter
www.mywifiext.net
in the address field of the browser.
The New Extender Setup page displays.
4.
Click the
NEW EXTENDER SETUP
button.
