NETGEAR WGR614v8 - 54 Mbps Wireless Router, Reference Manual

Page: 20 / 88

54 Mbps Wireless Router WGR614v8 Reference Manual
1-6 Introduction
v1.0, July 2007
You can use the status lights to verify connections.
Figure 1-1
Table 1-1. Status Light Descriptions
Label Activity Description
1. Power
On
Blink
Off
Power is supplied.
Firmware is corrupt; the router is in rescue mode running TFTP server.
Users can use TFTP client to upload a valid version of the firmware.
Power is not supplied to the router.
2. Test
On
Blink
Off
The unit is performing the power on self test diagnostic.
The unit is performing a firmware upgrade or restoring the factory
defaults.
The unit successfully completed the power on self test diagnostic.
3. Wireless
On
Off The Wireless port is initialized and the wireless feature is enabled.
The wireless feature is turned off or there is a problem.
4. Internet
On (amber)
On (green)
Blink (green)
The ethernet cable is connected but the router has not received an
Internet address.
The router has received an Internet address.
Data is being transmitted or received by the Internet port.
2
4
5
1
3