User’s Guide for the WG602 v3 54 Mbps Wireless Access Point
Basic Installation and Configuration
3-14
202-10060-01, September 2004
Information to Gather Before Changing Basic Wireless Settings
Before customizing your wireless settings, print this form and record the following information. If
you are working with an existing wireless network, the person who set up or is responsible for the
network will be able to provide this information. Otherwise, you will choose the settings for your
wireless network. Either way, record the settings for your wireless network in the spaces below.
•
Wireless Network Name (SSID):
______________________________ The SSID, identifies
the wireless network. You can use up to 32 alphanumeric characters. The SSID is case
sensitive. The SSID in the wireless adapter card must match the SSID of the wireless access
point. In some configuration utilities (such as in Windows XP), the term “wireless network
name” is used instead of SSID.
•
If WEP Authentication is Used.
Circle one:
Open System
,
Shared Key, or Auto
.
Note:
If you select Shared Key, the other devices in the network will not connect unless they
are set to Shared Key as well and are configured with the correct key.
–
WEP Encryption key size
. Choose one:
64-bit
or
128-bit
. Again, the encryption key size
must be the same for the wireless adapters and the wireless access point.
–
Data Encryption (WEP) Keys
. There are two methods for creating WEP data encryption
keys. Whichever method you use, record the key values in the spaces below.
•
Passphrase method
. ______________________________ These characters
are
case
sensitive. Enter a word or group of printable characters and click the Generate Keys
button. Not all wireless devices support the passphrase method.
•
Manual method
. These values
are not
case sensitive. For 64-bit WEP, enter 10 hex
digits (any combination of 0-9 or a-f). For 128-bit WEP, enter 26 hex digits.
Key 1: ___________________________________
Key 2: ___________________________________
Key 3: ___________________________________
Key 4: ___________________________________
•
If WPA-PSK Authentication is Used.
–
Passphrase
: ______________________________ These characters
are
case sensitive.
Enter a word or group of printable characters. When you use WPA-PSK, the other devices
in the network will not connect unless they are set to WPA-PSK as well and are configured
with the correct Passphrase.
Use the procedures described in the following sections to configure the WG602 v3. Store this
information in a safe place.
