NETGEAR WG602 V3, User Manual

Page: 105 / 120

User’s Guide for the WG602 v3 54 Mbps Wireless Access Point
Preparing Your PCs for Network Access D-11
202-10060-01, September 2004
Verifying TCP/IP Properties for Windows XP or 2000
To check your PC’s TCP/IP configuration:
1.
On the Windows taskbar, click the Start button, and then click Run.
The Run window opens.
2.
Type
cmd
and then click OK.
A command window opens
3.
Type
ipconfig /all .
Your IP Configuration information will be listed, and should match the values below if you are
using the default TCP/IP settings that NETGEAR recommends for connecting through a
router or gateway:
• The IP address is between 192.168.0.2 and 192.168.0.254
• The subnet mask is 255.255.255.0
• The default gateway is 192.168.0.1
4.
Type
exit .