NETGEAR Smart Switch GS752TXS, Hardware Installation Manual

Page: 12 / 36

Chapter 2. Physical Description | 12
2
2.
Physical Description
This chapter describes the GS752TXS Smart Switch hardware features. Topics include:
•
GS752TXS Front-Panel and Back-Panel Configuration
• LED Designations
•
Device Hardware Interfaces
GS752TXS Front-Panel and Back-Panel Configuration
The GS752TXS Smart Switch has 48 10/100/1000 Mbps copper ports and four dedicated
1000 Mbps/10Gbps SFP+ fiber ports. Up to two fiber ports (port 51 and 52) at a time can be
used as stacking ports.
Each port is capable of sensing the line speed and negotiating the duplex mode with the link
partner automatically.
Figure 2 illustrates the front panel of the NETGEAR GS752TXS Smart Switch.
Figure 2. Front Panel
The front panel contains the following:
• 48 RJ-45 connectors for 10/100/1000 Mbps autosensing Gigabit Ethernet switching ports
Green=Link at 1G
Yellow=Link at 10/
100M
Power
Reset
ID
Fan
Stack
Master
Factory
Defaults
1
2
3
4
5
6
7
8
9
10
11 13 15 17 19 21
12 22 14 16 18 20
23 25 27 29 31 33
24 34 26 28 30 32
35 37 39 41 43 45 47
36 38 40 42 44 46 48
GS752TXS
50F
49F
Green=10G Link Yellow=1G
Blink=ACT
SFP
+
52F
51F
Link/Act Mode —
Power, Fan, and
Link/Speed/ACT LEDs
10/100/1000 Ethernet Ports
1000M/10G
SFP Ports
Reset Button
Stack Master LEDs
Factory
Defaults Button
Stack ID LED