manualshive.com logo in svg

NETGEAR RT311, Reference Manual, Page: 25 / 125

Share
Download
NETGEAR RT311 Reference Manual Download Page 25

Installing and Connecting the Router

2-1

 

Chapter 2

Installing and Connecting the Router

This chapter provides instructions for installing the Model RT311 or RT314 Internet Access 
Gateway Router.

Package Contents

The product package should contain the following items:

•

Model RT311 or RT314 Internet Access Gateway Router

•

AC power adapter, 12 V DC output

•

10-foot twisted-pair Category 5 (Cat 5) Ethernet cable, straight-through wiring (white)

•

10-foot twisted-pair Category 5 Ethernet cable, crossover wiring (red) (RT311 only)

•

Model RT311 and RT314 Resource CD, including:

— This guide

— Application Notes

•

Model RT311 and RT314 Internet Access Gateway Router Installation Guide

•

Registration and Warranty Card

•

Support Information Card

Call your dealer if there are any wrong, missing, or damaged parts. Keep the carton, including 
the original packing materials, to repack the router if there is a need to return it for repair.

Summary of Contents for RT311






























































































































Reviews:

No comments