Page 18
steps to configure replication of ReadyRECOVER Backups:
1. Connect to the onsite ReadydATA with a supported web browser
2. select the “Replicate” tab for the top menu
3. Click the “New job” button
4. Give the replication job a unique and descriptive name
5. Expand the source system and select the source Backup set
6. Enter the iP Address of the destination system. (Note: this address must be accessible from the source system
for wAN replication, port forwarding through firewalls on the remote site may be need.)
a. for an alternative option that does not require manual port forwarding, ReadydATA’s cloud-managed replication can
be used. Please reference the ReadydATA Os software manual for setup instructions. This document is available
on the resource Cd that came with your ReadydATA. you can also obtain these manuals by clicking the ? icon in the
ReadydATA dashboard
7. select the “Access key” (Certificate) from the dropdown list and click “Connect”
8. select a volume from the remote ReadydATA as a destination for replication
9. Click the “Next” button to continue the wizard
Select “Replicate” Tab
Click “New Job” Button
Enter a descriptive name
for the replication job
Select Backup set from the
local ReadyDATA
Enter the IP Address of the
remote ReadyDATA
Select the Access key of
the Remote ReadyDATA
Select a Volume on the
remote system
Click “Next” to Continue