NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual
Fine-Tuning Your Network
5-11
v1.0, February 2008
4.
In the
Port Triggering Timeout
field, enter a value up to 9999 minutes. This value controls
the inactivity timer for the designated inbound ports. The inbound ports close when the
inactivity timer expires. This is required because the router cannot be sure when the
application has terminated.
5.
Click
Add Service
.
6.
In the
Service Name
field, type a descriptive service name.
7.
In the
Service User
list, select
Any
(the default) to allow this service to be used by any
computer on the Internet. Otherwise, select
Single address
, and enter the IP address of one
computer to restrict the service to a particular computer.
8.
Select the service type, either
TCP
or
UDP
or both (
TCP/UDP
). If you are not sure, select
TCP/UDP.
9.
In the
Triggering Port
field, enter the number of the outbound traffic port that will cause the
inbound ports to be opened.
10.
Enter the inbound connection port information in the
Connection Type
,
Starting Port
, and
Ending Port
fields.
11.
Click
Apply
. The service appears in the Port Triggering Portmap table.
Figure 5-4
