NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual
7-12
Troubleshooting
v1.0, January 2008
This field determines which operating frequency is used. It should not be necessary to change
the wireless channel unless you notice interference problems with another nearby wireless
router or access point. Select a channel that is not being used by any other wireless networks
within several hundred feet of your router. For more information about the wireless channel
frequencies, click the link to the online document
“Wireless Networking Basics” in
Appendix B
.
5.
Set the mode to
Up to 270 Mbps at 5 GHz and 54 Mbps at 2.4 GHz
.
6.
For Security Options, select
None
.
7.
Click
Apply
to save your changes.
8.
Select
Wireless Settings
under Advanced in the main menu of the WNDR3300 router
.
9.
Make sure the
Enable Wireless Router Radio
and
Enable SSID Broadcast
check boxes are
selected.
10.
Click
Setup Access List
.
11.
Make sure that the
Turn Access Control On
check box is
not
selected.
Note:
If you are configuring the router from a wireless computer and you change the
router’s SSID, channel, or security settings, you will lose your wireless
connection when you click
Apply
. You must then change the wireless settings
of your computer to match the router’s new settings.
Figure 7-2
