NETGEAR R6900P User Manual Download Page 13

Page: 13 / 215

Ports, Buttons, and Connectors on the Back Panel

The back panel of the router provides ports, buttons, antenna connectors, and a DC power connector. For
information about attaching the antennas, see

Attach the Antennas

on page 10.

Figure 3. Router back panel

In addition to the three antenna connectors, viewed from left to right, the back panel contains the following
components:

•

Reset button. For information about using the Reset button, see

Return the Router to Its Factory Default

Settings

on page 161.

•

Ethernet LAN ports. Use the four Gigabit Ethernet RJ-45 LAN ports to connect the router to LAN
devices.

•

Internet port. Use the yellow Gigabit Ethernet RJ-45 WAN port to connect the router to a modem.

•

Power On/Off button. Press the Power On/Off button to provide power to the router.

•

DC power connector. Connect the power adapter that came in the product package to the DC power
connector.

USB Port on the Front Panel

The USB 3.0 port is located on the front of the router.

Figure 4. USB port

Hardware Overview of the Router

Nighthawk AC1900 Smart WiFi Router Model R6900P

Summary of Contents for R6900P
























































































































































































































Search results

Summary of Contents for R6900P

Reviews:

Related manuals for R6900P

Brands by name

Popular brands

NETGEAR R6900P, User Manual

Search results

Summary of Contents for R6900P

Reviews:

Related manuals for R6900P

Brands by name

Popular brands