manualshive.com logo in svg

NETGEAR R6900P, User Manual

Share
Download
NETGEAR R6900P User Manual Download Page 122

4.

Select ADVANCED > Setup > LAN Setup.

5.

In the IP Address fields, enter the LAN IP address for the router.

6.

In the IP Subnet Mask fields, enter the LAN subnet mask for the router.

7.

Click the Apply button.

Your settings are saved.

If you changed the LAN IP address of the router, you are disconnected when the changes take effect.

To reconnect, close your browser, relaunch it, and log in to the router at its new LAN IP address.

Manage the Router Information Protocol Settings

Router Information Protocol (RIP) lets the router exchange routing information with other routers. By default,
RIP is enabled in both directions (in and out) without a particular RIP version.

To manage the RIP settings:

1.

Launch a web browser from a computer or mobile device that is connected to the network.

2.

Enter http://www.routerlogin.net.

A login window opens.

3.

Enter the router user name and password.

The user name is admin. The default password is password. The user name and password are
case-sensitive.

The BASIC Home page displays.

4.

Select ADVANCED > Setup > LAN Setup.

The LAN Setup page displays.

Manage the WAN and LAN Network Settings

122

Nighthawk AC1900 Smart WiFi Router Model R6900P

Summary of Contents for R6900P
























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands