manualshive.com logo in svg

NETGEAR PTVU1000, User Manual, Page: 64 / 80

Share
Download
NETGEAR PTVU1000 User Manual Download Page 64

64

Push2TV HD Adapter 

Display Is Flipped

Problem/Question:

I am connected to my TV in HDMI mode. I can get a correct display and sound if I use the 
Extend display option in the Windows 7 Screen Resolution window, but if I try to display the 
whole desktop on the TV using “show desktop on 2,” the display is upside down. 

Answer:

You might have selected 

Landscape (flipped)

 in the Screen Resolution window.

Display Turns Black with Windows Media Player

Problem/Question:

I am using Windows Media Player, and sometimes during movie play in full screen mode the 
Media Player application window becomes black. 

Answer:

Try re-sizing the application window. This should resolve this issue.

Text Does Not Show Properly While Video is Playing

Problem/Question:

I am watching a movie on my TV while having a second application open (for example, Word 
or Excel) in another window, and the fonts flicker between sharp and fuzzy. 

Answer:

Disable the Optimize for Video option from the DisplayLink icon in the taskbar because it 
applies compression to the text, resulting in the issue you described. For more information, 
see 

Using Optimize for Video Mode 

on page

 

54.

Video and Audio Synchronization

Problem/Question:

Audio is not synchronized with the video.

Summary of Contents for PTVU1000

















































































Reviews:

No comments