31
Push2TV HD Adapter
Supported Resolutions
Problem/Question:
I have a full HD TV, but I cannot set the screen resolution on it to 1920 x 1080, which is the
native resolution of this TV.
Answer:
The maximum screen resolution supported by the product is 1080p (1920 x 1080). However,
in Mirror mode you are limited by the maximum resolution of your PC. Therefore, you need to
change the mode to Extend mode, as described in
Configuring the Display
on page
22.
The Universal Push2TV HD TV Adapter Does Not Turn On
Problem/Question:
The Universal Push2TV HD TV Adapter does not turn on.
Symptom:
No picture is displayed on the wirelessly connected screen/TV.
Solution:
Make sure the power cord is correctly connected to the base. Verify that the TV is set to the
correct input (for example, HDMI1). This is done using the remote control of the TV.
Additionally, follow the steps in the
Installation Guide
for hardware and software installation,
and see
Configuring the Display
on page
22.
The Universal Push2TV HD TV Adapter Shows a “Ready to
Connect” Message
Problem/Question:
The Wireless Laptop to Home Cinema shows a “Ready to Connect” message.
Symptom:
A standard message is displayed on the wirelessly connected screen or TV.
Solution:
See
Configuring the Display
on page
22. Additionally, follow the steps in the
Installation
Guide
for hardware and software installation.
Summary of Contents for PTVU1000
Page 75: ...75 Push2TV HD Adapter ...