manualshive.com logo in svg

NETGEAR PTVU1000, User Manual, Page: 22 / 80

Share
Download
NETGEAR PTVU1000 User Manual Download Page 22

22

Push2TV HD Adapter 

Context Menu Options 

Menu Option 

Description

Block/UnBlock Device

 

Allows you to temporarily disable a device from connecting with the PC 
Adapter. 

Disassociate Device

 

Removes the device from the list. To return the device to the list, pairing must 
be performed.

Rename

Allows you to change the device name as it appears on the Universal 
Push2TV HD Manager. 

Properties

Displays the properties screen for this device. 

Configuring the Display 

Setting Options for the Display

The following are the suggested work configurations when you are connecting a display 
screen to the TV Adapter: 

•     

Mirror Mode

•     

Extend Mode

•     

Laptop with Lid Closed

•     

External Display Only

Note:  

On Windows XP/Vista, the display properties for the HD Base can 

be configured in two ways: as described in 

Configuring the Display 

via the Display Icon Context Menu 

on page

 

26, or as described in 

Configuring the Display through Windows Display Properties in 
Windows XP/Vista 

on page

 

29. On Windows 7, see 

Configuring the 

Display in Windows 7 

on page

 

24. 

 
When you change settings, or during first connection between the 
PC Adapter and the Universal Push2TV HD TV adapter, the PC 
display might flicker or turn on and off as the screen resolution is 
being automatically adjusted.

This section describes the different modes that can be set. 

Configuring the Display in 

Windows XP or Vista 

on page

 

26 and 

Configuring the Display in Windows 7 

on page

 

24, 

describe the procedures for configuring these modes.

Summary of Contents for PTVU1000

















































































Reviews:

No comments