background image

Glossary of Terms

Category 3 (CAT3):

A twisted pair cable that meets specified requirements for 10 Mbps

networking up to 328 ft. (100m).

Category 5 (CAT5):

A shielded twisted pair cable that meets requirements for 10 and 100 Mbps

networking up to 328 ft. (100m).

Local Area Network (LAN):

A communications network within a limited area, such as one building.

TCP/IP:

Transfer Control Protocol (TCP) with Internet Protocol (IP). The main

internetworking protocol used in the Internet. 

Print Server System Requirements

Windows 95 OSR2, 98, Me, NT 4.x, 2000, XP or Macintosh OS 8.6, 9.x, or X

A printer with a parallel port. For Macintosh computers, a PostScript printer with a
parallel port

Network software

Print Server Specifications

Network Protocols:

IEEE 802.3u, 100BASE-TX, Fast Ethernet; IEEE 802.3I 10BASE-T

CSMA/CD, TCP/IP and NetBEUI

Electromagnetic Emissions:

CE mark, commercial; FCC Part 15, Class B; EN 55 022 (CISPR

22), Class B; VCCI Class B ITE; EN50082-1, C-Tick N10947

Safety Agency Approvals:

CE mark, commercial, UL listed, CSA certified, TUV licensed, T-Mark

Summary of Contents for PS110 - Print Server - Parallel




















Reviews: