ProSecure Unified Threat Management (UTM) Appliance Reference Manual
Monitoring System Access and Performance
11-25
v1.0, January 2010
2.
Click the
IPSec VPN Connection Status
submenu tab.
The IPSec VPN Connection Status
screen displays.
The Active IPsec SAs table lists each active connection with the information that is described
in
Table 11-12
. The default poll interval is 5 seconds. To change the poll interval period, enter
a new value in the Poll Interval field, and then click
Set interval
. To stop polling, click
Stop
.
To review the status of current SSL VPN tunnels:
1.
Select
Monitoring > Active Users & VPNs
from the main menu. The Active Users & VPN
submenu tabs appear, with the Active Users screen in views
Figure 11-14
Table 11-12. IPsec VPN Connection Status Information
Item
Description (or Subfield and Description)
Policy Name
The name of the VPN policy that is associated with this SA.
Endpoint
The IP address on the remote VPN endpoint.
Tx (KB)
The amount of data that is transmitted over this SA.
Tx (Packets)
The number of IP packets that are transmitted over this SA.
State
The current status of the SA. Phase 1 is the authentication phase and Phase 2 is
key exchange phase. If there is no connection, the statu is IPsec SA Not
Established.
Action
Click the
Connect
table button to build the connection or click the
Disconnect
table button to terminate the connection.
