manualshive.com logo in svg

NETGEAR ProSecure, Appliance Reference Manual

Share
Download
NETGEAR ProSecure Appliance Reference Manual Download Page 176

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

6-10

Content Filtering and Optimizing Scans

v1.0, January 2010

2.

Enter the settings as explained in 

Table 6-3

.

Table 6-3. E-mail Filter Settings

Setting

Description (or Subfield and Description)

Filter by Subject Keywords 

Keywords

Enter keywords that should be detected in the e-mail subject line. Use commas to 
separate different keywords. The total maximum length of this field is 2048 characters, 
excluding duplicate words and delimiter commas.

Action

SMTP

From the 

SMTP

 pull-down menu, specify one of the following actions when a 

keyword that is defined in the Keywords field is detected:
•

Block email

. The e-mail is blocked, and a log entry is created.

•

Log only

. This is the default setting. Only a log entry is created. The

e-mail is not blocked.

POP3

From the 

POP3

 pull-down menu, specify one of the following actions when a 

keyword that is defined in the Keywords field is detected:
•

Block email

. The e-mail is blocked, and a log entry is created.

•

Log only

. This is the default setting. Only a log entry is created. The

e-mail is not blocked.

Filter by Password-Protected Attachments (ZIP, RAR, etc.)

Action

SMTP

From the 

SMTP

 pull-down menu, specify one of the following actions when a 

password-protected attachment to an e-mail is detected:
•

Block email

. The e-mail is blocked, and a log entry is created.

•

Delete attachment

. The e-mail is not blocked, but the attachment is deleted, 

and a log entry is created.

•

Log only

. This is the default setting. Only a log entry is created. The

e-mail is not blocked and the attachment is not deleted.

POP3

From the 

POP3

 pull-down menu, specify one of the following actions when a 

password-protected attachment to an e-mail is detected:
•

Delete attachment

. The e-mail is not blocked, but the attachment is deleted, 

and a log entry is created.

•

Log only

. This is the default setting. Only a log entry is created.

The e-mail is not blocked and the attachment is not deleted.

IMAP

From the 

IMAP

 pull-down menu, specify one of the following actions when a 

password-protected attachment to an e-mail is detected:
•

Delete attachment

. The e-mail is not blocked, but the attachment is deleted, 

and a log entry is created.

•

Log only

. This is the default setting. Only a log entry is created.

The e-mail is not blocked and the attachment is not deleted.

Summary of Contents for ProSecure





































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands