NETGEAR Orbi RBKE963 User Manual Download Page 11

Page: 11 / 142

Table 2. Router LED behavior (Continued)

Description

LED color

The router is not connected to the Internet.

Solid magenta

The router connected to the Internet and is
working normally.

Off

Orbi satellite overview

The following sections are an overview of the Orbi satellite hardware features and LED
behavior.

Orbi satellite hardware features

The following figures shows the Orbi satellite hardware features.

Figure 2. Orbi satellite front and back views

1. Satellite LED: Use the LED on the front of the router to determine its status. For

more information about the LED behavior, see Orbi satellite LED behavior on page
12.

2. Sync button: Use the Sync button to connect the satellite to the router. For more

information, see Sync your Orbi satellite with your Orbi router on page 15.

3. 2.5G Ethernet port: This Ethernet port provides a wired connection speed of up to

2.5 Gbps. You can use an Ethernet cable to connect this port to the 2.5G Ethernet

User Manual

Overview

Orbi Quad-Band Mesh WiFi 6E System

Summary of Contents for Orbi RBKE963















































































































































Search results

Summary of Contents for Orbi RBKE963

Reviews:

Related manuals for Orbi RBKE963

Brands by name

Popular brands

NETGEAR Orbi RBKE963, User Manual

Search results

Summary of Contents for Orbi RBKE963

Reviews:

Related manuals for Orbi RBKE963

Brands by name

Popular brands