Set Up Access Control From a Web Browser
To set up access control:
1. From a computer that is connected to your network, launch a web browser.
2. Enter
http://m.home
or
http://192.168.1.1
.
A login page displays.
3. Enter the administrator login password.
The password is case-sensitive.
The dashboard displays.
4. Select
SETTINGS > Security > Access Control
.
The Access Control page displays.
5. Select the
Enable
check box.
6. In the
Filter Type
menu, select
Allow List
or
Block List.
Depending on your selection, the page displays an Allow List or a Block List.
7. To add a device to the list, click the
ADD
button and select the device.
The device is added to the list.
8. To remove a device from the list, select the device and then click the
DELETE
button.
The device is removed from the list.
Turn Off USB Tethering
USB tethering lets you connect to the Internet from supported computers with a USB
cable and charge the mobile router battery at the same time.
Figure 7. Mobile router tethered to a laptop computer
Turn off USB tethering if you only want to charge your mobile router with your computer.
User Manual
45
Control Internet Access
Nighthawk M2 Model MR2100
