NETGEAR Nighthawk CAX30 User Manual Download Page 19

Page: 19 / 140

Specify the Cable Connection Starting
Frequency

The starting frequency is automatically generated. For most Internet connections, you
do not need to specify this information. If you must enter a starting frequency, contact
your Internet provider.

To change the starting frequency:

1. Launch a web browser from a computer or mobile device that is connected to the

modem router network.

2. Enter http://routerlogin.net or 192.168.1.1.

A login window opens.

3. Enter the modem router user name and password.

The user name is admin. The default password is password. The user name and
password are case-sensitive.

The BASIC Home page displays.

4. Select Cable Connection.

The page displays the status of all downstream and upstream channels.

5. Enter the starting frequency.

6. Click the Apply button.

Your settings are saved.

User Manual

Specify Your Internet Settings

Nighthawk AX6 AX2700 WiFI Cable Modem Router Model CAX30

Summary of Contents for Nighthawk CAX30













































































































































Search results

Summary of Contents for Nighthawk CAX30

Reviews:

Related manuals for Nighthawk CAX30

Brands by name

Popular brands

NETGEAR Nighthawk CAX30, User Manual

Search results

Summary of Contents for Nighthawk CAX30

Reviews:

Related manuals for Nighthawk CAX30

Brands by name

Popular brands