NETGEAR Nighthawk AC2400 User Manual Download Page 16

Page: 16 / 164

To cable your router:

1. Unplug your modem’s power, leaving the modem connected to the wall jack for

your Internet service.
If your modem uses a battery backup, remove the battery.

2. Plug in and turn on your modem.

If your modem uses a battery backup, put the battery back in.

3. Connect your modem to the Internet port of your router with the yellow Ethernet

cable that came with your router.

4. Connect the power adapter to your router and plug the power adapter into an outlet.

5. Press the

Power On/Off

button on the back panel of the router.

User Manual

Hardware Overview of the
Router

Nighthawk AC2400 Smart WiFi Router Model AC2400

Summary of Contents for Nighthawk AC2400





































































































































































Search results

Summary of Contents for Nighthawk AC2400

Reviews:

Related manuals for Nighthawk AC2400

Brands by name

Popular brands

NETGEAR Nighthawk AC2400, User Manual

Search results

Summary of Contents for Nighthawk AC2400

Reviews:

Related manuals for Nighthawk AC2400

Brands by name

Popular brands