NETGEAR Nighthawk AC2400 User Manual Download Page 117

Page: 117 / 164

To change your settings:

1. Launch a web browser from a computer or mobile device that is connected to the

router network.

2. Enter

http://www.routerlogin.net

A login window opens.

3. Enter the router admin user name and password.

The user name is

admin

. The password is the one that you specified the first time

that you logged in. The user name and password are case-sensitive.

The BASIC Home page displays.

4. Select

ADVANCED > Advanced Setup > Dynamic DNS

The Dynamic DNS page displays.

5. Change your DDNS account settings as necessary.

6. Click the

Apply

button.

Your settings are saved.

User Manual

117

Use Dynamic DNS to Access USB
Storage Devices Through the
Internet

Nighthawk AC2400 Smart WiFi Router Model AC2400

Summary of Contents for Nighthawk AC2400





































































































































































Search results

Summary of Contents for Nighthawk AC2400

Reviews:

Related manuals for Nighthawk AC2400

Brands by name

Popular brands

NETGEAR Nighthawk AC2400, User Manual

Search results

Summary of Contents for Nighthawk AC2400

Reviews:

Related manuals for Nighthawk AC2400

Brands by name

Popular brands