NETGEAR N300 WNR2000v5 User Manual Download Page 93

Page: 93 / 113

Specify Internet Port Settings

N300 WiFi Router

12.

Type the IP address in the

Internal IP address

field or select the radio button for an

attached device listed in the table.

13.

Click the

Apply

button.

The service is now in the list on the Port Forwarding/Port Triggering screen.

Edit a Port Forwarding Service



To edit a port forwarding entry:

Launch a web browser from a computer or wireless device that is connected to the

network.

In the address field of the web browser, enter

www.routerlogin.net

www.routerlogin.com

A login screen displays.

Enter the router user name and password.

The user name is

admin

. The default password is

password

. The user name and

password are case-sensitive.

The BASIC Home screen displays.

Select

ADVANCED > Advanced Setup > Port Forwarding/Port Triggering

The Port Forwarding/Port Triggering screen displays.

Leave the

Port Forwarding

radio button selected as the service type.

In the table, select the radio button next to the service name.

Click the

Edit Service

button.

The Ports - Custom Services screen displays.

Specify changes as needed.

Click the

Apply

button.

Your changes are saved.

Delete a Port Forwarding Entry



To delete a port forwarding entry:

Launch a web browser from a computer or wireless device that is connected to the

network.

In the address field of the web browser, enter

www.routerlogin.net

www.routerlogin.com

A login screen displays.

Enter the router user name and password.

Summary of Contents for N300 WNR2000v5


















































































































Search results

Summary of Contents for N300 WNR2000v5

Reviews:

Related manuals for N300 WNR2000v5

Brands by name

Popular brands

NETGEAR N300 WNR2000v5, User Manual

Search results

Summary of Contents for N300 WNR2000v5

Reviews:

Related manuals for N300 WNR2000v5

Brands by name

Popular brands