NETGEAR N300 WNR2000v5 User Manual Download Page 77

Page: 77 / 113

Manage Your Network

N300 WiFi Router

The user name is

admin

. The default password is

password

. The user name and

password are case-sensitive.

The BASIC Home screen displays.

Select

ADVANCED

The ADVANCED Home screen displays. The Internet Port pane displays these WAN
Internet port settings:

•

MAC Address

. The MAC address of the WAN Internet port.

•

IP Address/Mask

. The IP address of the WAN Internet port.

•

Connection

. The type of WAN Internet port connection.

•

Default Gateway

. The IP address of the default gateway.

•

Domain Name Server

. The IP address of the Domain Name Server.

Display Internet Port Statistics



To display Internet port statistics:

Launch an Internet browser from a computer or wireless device that is connected to the

network.

In the address field of the web browser, enter

www.routerlogin.net

www.routerlogin.com

A login screen displays.

Enter the router user name and password.

The user name is

admin

. The default password is

password

. The user name and

password are case-sensitive.

The BASIC Home screen displays

Click the

ADVANCED

tab.

The ADVANCED Home screen displays.

In the Internet Port pane, click the

Show Statistics

button.

The following information displays:

•

System Up Time

. The time elapsed since the router was last restarted.

•

Port

. The statistics for the WAN (Internet) and LAN (Ethernet) ports. For each port,

the screen displays the following information:

Summary of Contents for N300 WNR2000v5


















































































































Search results

Summary of Contents for N300 WNR2000v5

Reviews:

Related manuals for N300 WNR2000v5

Brands by name

Popular brands

NETGEAR N300 WNR2000v5, User Manual

Search results

Summary of Contents for N300 WNR2000v5

Reviews:

Related manuals for N300 WNR2000v5

Brands by name

Popular brands