NETGEAR MR1100 User Manual Download

Page: 58 / 86

Micro SD Card Requirements

The mobile router supports SD cards up to 128 GB in the following formats: FAT, FAT-16, FAT-32, NTFS,
HFS, and HFS+.

For information about how to format a USB storage device using a computer or other
device, consult the instructions that came with your computer or device.

Note

Formatting the USB storage device erases all data on the device.

Install a Micro SD Card

Micro SD cards are sold separately.

To install the micro SD card:

Obtain a micro SD card (sold separately).

Make sure that power to the mobile router is off.

Remove the cover on the bottom of the mobile router.

Place your thumbs on the arrows on the cover and press down while sliding the cover up.

Share Media and Storage

Nighthawk LTE Mobile Hotspot Router Model MR1100

Summary of Contents for MR1100























































































Search results

Summary of Contents for MR1100

Reviews:

Related manuals for MR1100

Brands by name

Popular brands

NETGEAR MR1100, User Manual

Search results

Summary of Contents for MR1100

Reviews:

Related manuals for MR1100

Brands by name

Popular brands