NETGEAR ME101 - Wireless EN Bridge Network Converter User Manual Download

Page: 7 / 25

Connecting One Device

Note:

If you want to connect multiple devices, see the procedure on page 6.

Turn off the gaming console or other Ethernet-enabled device.

Connect the provided Ethernet cable between the ME101 Wireless Bridge and the gaming
console or other Ethernet-enabled device.

Connect the power adapter to the wireless bridge and plug the power adapter in to a
power outlet. The Power and Wireless LAN lights should light up.

After you see the Wireless LAN light light up, turn on the gaming console or other
Ethernet-enabled device.

If the bridge and the Ethernet-enabled device are successfully connected, the Network
light will light up. This light flashes when there is network activity.

Note:

If your setup works with the default settings, you don’t need to install the software

from the provided CD to configure the bridge unless you need to change the
Country/Region setting from the default setting (

U.S.A.

) or you have more than one

ME101 bridge on your network.

Default

Ethernet

Antenna

DC in 5V

Gaming console or other
Ethernet-enabled device

ME101 Wireless
Ethernet Bridge

Summary of Contents for ME101 - Wireless EN Bridge Network Converter


























Search results

Summary of Contents for ME101 - Wireless EN Bridge Network Converter

Reviews:

Related manuals for ME101 - Wireless EN Bridge Network Converter

Brands by name

Popular brands

NETGEAR ME101 - Wireless EN Bridge Network Converter, User Manual

Search results

Summary of Contents for ME101 - Wireless EN Bridge Network Converter

Reviews:

Related manuals for ME101 - Wireless EN Bridge Network Converter

Brands by name

Popular brands