NETGEAR JNR1010 User Manual Download Page 59

Page: 59 / 103

Administration

N150 4-Port Wireless Router JNR1010

Manage the Configuration File

The configuration settings of the N150 4-Port Wireless Router are stored within the router in
a configuration file. You can back up (save) this file to your computer, restore it, or reset it to
the factory default settings.

Back Up Settings



To back up the router’s configuration settings:

Select

Advanced > Administration >

Backup Settings

to display the following screen:

Click

Back Up

to save a copy of the current settings.

Choose a location to store the .cfg file that is on a computer on your network.

Restore Configuration Settings



To restore configuration settings that you backed up:

Enter the full path to the file on your network, or click the

Browse

button to find the file.

After you locate the .cfg file, click the

Restore

button to upload the file to the router.

Upon completion, the router reboots.

WARNING!

Do not interrupt the reboot process.

Summary of Contents for JNR1010








































































































Search results

Summary of Contents for JNR1010

Reviews:

Related manuals for JNR1010

Brands by name

Popular brands

NETGEAR JNR1010, User Manual

Search results

Summary of Contents for JNR1010

Reviews:

Related manuals for JNR1010

Brands by name

Popular brands