NETGEAR GS748TS - ProSafe 48 Port Gigabit Stackable Smart Switch, User Manual

Page: 53 / 72

GS748T Software User Manual
Configuring the Switch 4-19
v2.0, April 2007
2. In the text boxes along one line, enter the following:
• Your Manager host IP address
• Community name
• Privilege—select ReadOnly or ReadWrite
• Traps—select the those that you want to receive from T1 , T2 , and T3 (explained above)
• Admin—set to Enable to allow management
3. Click Apply to save your settings.
Controlling Switch Access by MAC Address and VLAN ID
A configuration page enables you to select the source MAC address and VLAN members that are
allowed to access this switch.
If the VLAN mode for the switch is set up as Port-based, you enter a MAC address and port
number that you want to permit access this switch. If the VLAN is set up in 802.1Q mode, you
enter a MAC address and VID to permit access.
To Add a MAC Address
1. From the main Navigation Pane menu, select:
Switch
→
Advanced
→
Trust MAC; the Trusted MAC Settings page is displayed.
2. Click on Add ; a dialog window is appears.
3. Enter your trusted MAC address:
Figure 4-16