NETGEAR GS748TS - ProSafe 48 Port Gigabit Stackable Smart Switch, User Manual

Page: 26 / 72

GS748T Software User Manual
3-2 Basic Web Management
v2.0, April 2007
• IP address: 192.168.0.239
• Subnet Mask: 255.255.255.0
From the home page thus accessed, as described in the next section, you may want to change the
network parameters to match those of your network. This is done using the “Set-up” option
selected from the navigation pane of the web interface. Your host PC network parameters must
then also be set back to match your network.
The NETGEAR Home Page and Switch Status
Having considered the preceding section, the NETGEAR home page for the GS748T Smart
Switch can be accessed from any PC with a web browser.
To start the application:
1. Open a web browser.
2. Enter the device IP address in the address bar.
3. Press Enter . The Login page appears as shown below.
Figure 3-1