Specify IP Address Settings for the Switch
By default, the switch IP address works as follows:
•
If you cable the switch to a network with a DHCP server before you power on the
switch, the DHCP server assigns an IP address to the switch when the switch is
powered on.
•
If you power on the switch when it is not connected to a network with a DHCP server,
the switch uses its default IP address, which is 192.168.0.239.
You can disable the DHCP mode in the switch and enter static IP address and subnet
mask values for the switch as well as the address of the gateway device used by the
switch.
Use the Local Browser Interface to Specify the Switch IP
Address
To specify IP address settings for the switch using the local browser interface:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that
is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
4. Enter the switch password.
The default password is
password
. The password is case-sensitive.
The Switch Information page displays.
5. In the
DHCP Mode
menu, select
Disable
.
The
IP Address
,
Subnet Mask
, and
Gateway Address
fields are enabled.
6. Enter the IP address, subnet mask, and gateway address.
7. Click the
Apply
button.
Your settings are saved.
User Manual
49
Manage Network Settings
8-Port Gigabit Ethernet Smart Managed Plus Switch Model GS110EMX
