specifications A-1
APPENDIX A: SPECIFICATIONS
This appendix provides specifications for the NETGEAR GA622T Copper Gigabit
Ethernet Card.
Cable Specifications GA622T (100/1000BASE-T)
Port Type
Connector
Media
Maximum Distance
100/1000BASE-T
RJ-45
CAT 5 UTP/CAT 5e UTP
325 feet (100 meters)
Note:
1000BASE-T signaling requires four twisted pairs of Category 5
balanced cabling, as specified in ISO/IEC 11801:1995 and ANSI/EIA/TIA-
568-A (1995) and tested for additional performance using testing procedures
defined in TIA/EIA TSB95.
Technical Specifications
General Specifications
NETGEAR GA622T Copper Gigabit Ethernet Card
Standards Compatibility
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3u Auto Negotiation
IEEE 802.3x Flow Control
GA622T Network
RJ-45 connector for Category 5 UTP cable
Connection
Full-duplex 2000 Mbps (1000 Mbps each way) Gigabit Ethernet
Host Connection
Single slot, short form factor, PCI card with 32-bit connectors
Single slot, long form factor, PCI card with 64-bit connectors
PCI rev 2.2 compliant
Clock speed up to 66 MHz
DC Operating Voltage
+5V +/- 5%
Power Consumption
14 watts, maximum
2.8A @ + 5VDC
GA622T.Manual.FINAL 3/1/01 11:20 AM Page 59
