Windows 95OSR2/98/Me driver software 3-1
CHAPTER 3: WINDOWS 95OSR2/98/ME DRIVER SOFTWARE
This chapter provides information about the Microsoft Windows 95OSR2/98/Me
driver software.
This chapter also describes how to:
• Install the driver software in the Windows 98 environment
• Move the card to a different slot
Note:
The specific steps and screen shots used in this chapter refer to a
computer with Windows 98 installed, but the information and procedures
shown here apply to computers with Windows 950SR2 and Windows Me.
Installing the Driver Software
A network driver must be installed before the card can be used with your
Windows 98 system.
Note:
The Gigabit Ethernet card must be physically installed in your system
prior to installing the driver software. See Chapter 2 “Hardware Installation,”
for details.
When the Windows 98 System first boots up after installing a new hardware device,
such as a GA622T Copper Gigabit Ethernet Card, the system automatically detects
the new hardware and prompts you to install the driver software for the device.
GA622T.Manual.FINAL 3/1/01 11:20 AM Page 19
