Reference Manual for the ADSL Modem Wireless Router DG834GSP
B-12
NETGEAR VPN Configuration
v1.0, June 2007
5.
Configure the DG834GSP as in the Gateway-to-Gateway procedures using the VPN Wizard
(see
“How to Set Up a Gateway-to-Gateway VPN Configuration” on page 8-21
), being certain
to use appropriate network addresses for the environment.
The LAN Addresses used in this example are as follows:
a.
In Step 1, enter
toFVL328
for the Connection Name.
b.
In Step 2, enter
fvl328.dyndns.org
for the remote WAN's IP address.
c.
In Step 3, enter the following:
•
IP Address =
172.23.9.1
•
Subnet Mask =
255.255.255.0
6.
Configure the FVL328 as in the Gateway-to-Gateway procedures for the VPN Wizard (see
“How to Set Up a Gateway-to-Gateway VPN Configuration” on page 8-21
), being certain to
use appropriate network addresses for the environment.
a.
In Step 1, enter
toDG834
for the Connection Name.
b.
In Step 2, enter
dg834g.dyndns.org
for the remote WAN's IP address.
c.
In Step 3, enter the following:
•
IP Address =
10.5.6.1
•
Subnet Mask =
255.255.255.0
7.
Test the VPN tunnel by pinging the remote network from a PC attached to the DG834GSP.
a.
Open the command prompt (Start -> Run -> cmd)
b.
ping 172.23.9.1
Device
LAN IP Address
LAN Subnet Mask
DG834GSP
10.5.6.1
255.255.255.0
FVL328
172.23.6.1
255.255.255.0