NETGEAR D6220 User Manual Download Page 71 | Manualshive

Page: 71 / 266

NETGEAR D6220 User Manual Download Page 71

5.

From the Internet Connection Type menu, select Auto Detect.

The modem router automatically detects the information in the following fields:

•

Connection Type. This field indicates the connection type that is detected.

•

Router’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired for the modem
router’s WAN (or Internet) interface. The number after the slash (/) is the length of the prefix, which
is also indicated by the underline (_) under the IPv6 address. If no address is acquired, the field
displays Not Available.

•

Router’s IPv6 Address on LAN. This field shows the IPv6 address that is acquired for the modem
router’s LAN interface. The number after the slash (/) is the length of the prefix, which is also indicated
by the underline (_) under the IPv6 address. If no address is acquired, the field displays Not Available.

6.

Select an IP Address Assignment radio button:

•

Use DHCP Server. This method passes more information to LAN devices but some IPv6 systems
might not support the DHCv6 client function.

•

Auto Config. This is the default setting.

This setting specifies how the modem router assigns IPv6 addresses to the devices on your home
network (the LAN).

7.

(Optionally) Select the Use This Interface ID check box and specify the interface ID to be used for the
IPv6 address of the modem router’s LAN interface.

If you do not specify an ID here, the modem router generates one automatically from its MAC address.

8.

Click the Apply button.

Your settings are saved.

Manage the Internet Settings Manually

71

AC1200 WiFi VDSL/ADSL Modem Router Model D6220

«
...
69
70
71
72
73
...
»

Summary of Contents for D6220











































































































































































































































































Reviews:

No comments