manualshive.com logo in svg

NETGEAR D6220, User Manual, Page: 20 / 266

Share
Download
NETGEAR D6220 User Manual Download Page 20

•

Ethernet cable. Use an Ethernet cable to connect your computer to a yellow Ethernet LAN port on
the modem router.
The product package contains a yellow Ethernet cable.
Your computer connects to the modem router’s LAN.

•

WiFi. Connect to the default WiFi network of the modem router:

a.

On your WiFi-enabled computer or mobile device, find and select the WiFi network.
The WiFi network name (SSID) is on the product label.

b.

Join the WiFi network and enter the WiFi password.
The password (network key) is on the product label.
Your WiFi-enabled computer or mobile device connects to the modem router’s WiFi network.

If the computer is set to a static (fixed) IP address (this setting is uncommon), either
change the computer to obtain an IP address automatically from the modem router
through DHCP, or change the IP address of the computer to a static IP address in
the 192.168.0.2–192.168.0.254 range.

Note

8.

Launch a web browser.

The modem router checks the Internet connection.

If the Configuring the Internet Connection page displays, skip to

 Step 11

. If the page does not display,

see

 Step 9

.

Install and Access the Modem Router and Its Network

20

AC1200 WiFi VDSL/ADSL Modem Router Model D6220

Summary of Contents for D6220











































































































































































































































































Reviews:

No comments