NETGEAR CVG834G, Reference Manual

Page: 54 / 80

Wireless Cable Voice Gateway Model CVG834G Reference Manual
4-4 Managing Your Network
v2.0, November 2007
To enable emailing of logs:
1. In the Contact Email Address field, type the e-mail address to which the logs will be sent.
Use a full e-mail address (for example, ChrisXY@myISP.com).
2. In the SMTP Server Name field, type the outgoing SMTP mail server of your ISP (for
example, mail.myISP.com). You may be able to find this information in the configuration
menu of your e-mail program. If you leave this field blank, no alerts or logs will be sent.
3. Select the E-mail Alerts Enable check box.
4. Click E-mail Log to send the log immediately
5. Click Apply .
.
Restoring Factory Default Configuration Settings
The configuration settings are stored in a configuration file in the gateway. You can use Erase to
restore the factory default configuration settings. The default settings are listed in
“Factory Default
Settings” in Appendix A .
To erase the configuration settings and return them to the factory default settings:
1. Under the Maintenance heading on the main menu, select Set Password.
2. For Restore Factory Defaults , select Yes .
3. Click Apply . The gateway reboots.
After an erase, the gateway user name is admin and the password is password . The LAN IP
address is 192.168.0.1, and the DHCP client is enabled.
Figure 4-3
Note: To restore the factory default configuration settings without knowing the login
password or IP address, use the reset button on the rear panel of the gateway.
Use a paper clip to press the button for at least 5 seconds.