manualshive.com logo in svg

NETGEAR C6250, User Manual

Share
Download
NETGEAR C6250 User Manual Download Page 88

Manage the WAN and LAN Network

 Settings 

88

AC1600 WiFi Cable Modem Router 

The BASIC Home page displays.

5. 

Select 

ADVANCED > Setup > LAN Setup

.

The LAN Setup page displays.

6. 

In the Address Reservation Table, select the radio button next to the reserved address that 

you want to remove.

7. 

Click the 

Delete

 button.

The reserved address is removed from the Address Reservation Table.

8. 

Click the 

Apply

 button.

Your settings are saved.

Manage the IPv6 LAN Settings

You can manage the IPv6 LAN settings only if the cable Internet provider assigns an IPv6 
Internet address to the modem router. If the cable Internet provider assigns only an IPv4 
Internet address to the modem router, you can skip this section.

If the cable Internet provider assign an IPv6 IP address to the modem router, you can specify 
how the modem router must assign IPv6 addresses to the devices on your home network 
(the LAN) and you can enable or disable the IPv6 firewall.

To manage the IPv6 LAN settings:

1. 

Launch an Internet browser from a computer or WiFi device that is connected to the 

network.

2. 

Type 

http://www.routerlogin.net

.

A login window opens.

3. 

Type 

admin

 for the user name and type your password.

If you did not yet personalize your password, type 

password 

for the password.

4. 

Click the 

OK

 button.

The BASIC Home page displays.

5. 

Select 

ADVANCED > Advanced Setup > IPv6

.

Summary of Contents for C6250







































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands