manualshive.com logo in svg

NETGEAR C6250, User Manual

Share
Download
NETGEAR C6250 User Manual Download Page 81

Manage the WAN and LAN Network

 Settings 

81

 AC1600 WiFi Cable Modem Router

Manage the WAN Security Settings

The WAN security settings include port scan protection and denial of service (DoS) 
protection, which can protect your LAN against attacks such as Syn flood, Smurf Attack, Ping 
of Death, and many others. By default, DoS protection is disabled and a port scan is rejected.

You can also enable the modem router to respond to a ping to its WAN (Internet) port. This 
feature allows your modem router to be discovered. Enable this feature only as a diagnostic 
tool or if a specific reason exists.

To change the default WAN security settings:

1. 

Launch an Internet browser from a computer or WiFi device that is connected to the 

network.

2. 

Type 

http://www.routerlogin.net

.

A login window opens.

3. 

Type 

admin

 for the user name and type your password.

If you did not yet personalize your password, type 

password 

for the password.

4. 

Click the 

OK

 button.

The BASIC Home page displays.

5. 

Select 

ADVANCED > Setup > WAN Setup

.

6. 

View or change the security settings.

Summary of Contents for C6250







































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands