NETGEAR ANT2405 - 5 dBi Omni-directional Antenna, Installation Manual

Page: 8 / 24

Installation Guide for the 9 dBi Omni-directional Antenna ANT2409
1-4
v1.0, April 2008
Flat Surface Mounting Configuration
This illustration shows a flat surface mount configuration.
For wall mount installation, the L-bracket is not used.
Placement and Other Important Considerations
Before installing your wireless antenna, observe the placement considerations.
Antenna placement dramatically affects potential coverage. Follow these
guidelines to maximize coverage:
• Place the antenna in a vertical position. Either right side up or up-side-down is
OK.
• Place the antenna in the middle of the coverage zone and at 1.5m or higher
above the floor.
Figure 1-3
R
R
Wall Mount