NETGEAR ANT2405 - 5 dBi Omni-directional Antenna, Installation Manual

Page: 11 / 24

2-1
v1.0, April 2008
Chapter 2
Installing the Wireless Antenna
There are two parts to the wireless antenna installation process:
• Assemble the wireless antenna for pole mount installation or flat surface
mount installation.
• Connect the appropriate electrical hardware depending on if the installation is
indoors or outdoors.
Follow the instructions in this section of the manual to install your antenna.
First, Assemble and Mount the Antenna
The antenna can be mounted vertically right-side-up or up-side-down.
1. Assemble the antenna as shown in the following illustration:
Figure 2-1