Use Your Mobile Hotspot
22
Telstra Pre-Paid 4G My Pocket Wi-Fi Ultimate
Note:
When you change your profile options (including disabling or enabling
either Wi-Fi network), the hotspot resets. Any devices connected to
the hotspot are disconnected when the hotspot resets.
Add a Wireless Device to Your Wi-Fi Network
You can connect up to 15 wireless devices (such as smartphones, laptops, tablets, digital
cameras, printers, gaming consoles, and digital picture frames) to your hotspot network. For
information about setting connections for main Wi-Fi and guest Wi-Fi networks, see
Set the
Maximum Number of Connected Devices
on page
24.
You can add a wireless device to your Wi-Fi network manually. If the device you are adding is
WPS enabled, you can use the WPS method to connect the device without using the Wi-Fi
password.
Add a Wireless Device Manually
1.
On the wireless device that you want to add to your network, view the list of available
Wi-Fi networks.
2.
Connect to the network that corresponds to your hotspot network as displayed on the LCD.
3.
When prompted, enter the Wi-Fi password for your hotspot network.
The Wi-Fi password displays on the hotspot LCD. If the screen is turned off, press and
quickly release the Power key to awaken the hotspot.
Add a WPS-Enabled Device
You can add a WPS-enabled Wi-Fi device to your Wi-Fi network without a Wi-Fi password,
using the hotspot web page or the LCD.
To add a WPS-enabled Wi-Fi device from the LCD:
1.
Press the Power key to awaken the hotspot.
2.
On the LCD device, press the Navigation key until the
Wi-Fi Protected Setup
screen
displays.
3.
Press the Power key.
